The device can according to the glass and production of different specifications of the high efficiency, stable operation, loading machine stick is arranged on the lower part of water-saving plate is arranged on the upper part of the cleaning pipes, both the initial cleaning glass, and the impurity cleaning plate roller surface clean, greatly reducing the glass scratch, the upper brush is divided into two kinds of hard and soft. Can choose to complete the upgrade.
Main technical parameters:
This 3 stage rotary brush, cold water washing;
Adopt double air knife type hot air drying system; independent fan, circulating water, hot functions combination collocation.
This brush with gear and rack transmission; ensure the stability of equipment.
This glass conveyed by frequency conversion motor, drive chain, rubber roller sprocket and intensive to achieve;
You can use three sets of brushes, cleaning coating, LOW-E glass. Optional lifting adjustment, easy to clean and adjust brush connected to the water tank position.


When the machine is divided into three stainless steel water tank, three groups. The first group of glass spray washing, the grinding end edge of the glass on the glass dust clean.


The second group of three brush spray, brush can easily put the glass thoroughly rinse.


The third group and the water spray, water and residue on the dirt washed clean. The heating air knife to ensure cleaning effect.


This system adopts the upper fan type, equipped with stainless steel double air knife, ensure the long time use of rust to improve the cleaning effect.


When the shield spray treatment, appearance is not easy to rust.


This wind machine adopts 15kW to ensure the cleaning effect.


Technical parameter:


After the power supply: 380V 50Hz


When the total power: 20.39kW


This size: 6000mm * 3200mm * 2800mm


Only the fastest processing speed: 12 m/min


When cleaning the glass most wide: 2500mm


When cleaning the glass minimum size: 420 x 500 mm


When the thickness of glass processing range: 3~24 mm